Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateRaynor Garage Door Installation in Marietta: What to Know First
Raynor garage door installation in Marietta typically runs $700 to $2,200 for a full door replacement, with most single-car doors landing between $800 and $1,500 and double-car doors between $1,200 and $2,200. We install and service Raynor doors as an independent Raynor service provider, which means we’re not tied to one manufacturer’s sales targets, but we know their product lines inside-out and keep our pricing straightforward. We’re not a franchise, and we’re not on Raynor’s payroll. We’re a local Marietta garage door team, and we repair their doors honestly.

If you own a Raynor and it’s wobbling, grinding, or struggling to open, this page tells you what’s likely wrong, what it costs, and how we approach the fix. Call (762) 209-3693 any time. A person answers, day or night.
How Raynor Products Fail – and How We Fix Them
Raynor builds a solid door. We work on them all over Marietta, from the east side near Sandy Plains to the older subdivisions off Powder Springs Road. They have a few common failure patterns we see consistently, and knowing which one you have gets you an accurate diagnosis faster.
- Raynor AP series torsion spring fatigue. The AP series (common on mid-2000s Marietta homes) uses a torsion spring system mounted above the door opening. In our climate, the temperature swings from cold winter nights to humid summer days accelerate spring fatigue. A spring that fails on a Raynor AP 138 or AP 200 tends to snap clean rather than stretch, which is a safety hazard. We replace the spring with a matched-duty unit and set the door balance to spec, same visit. Repair runs $180 to $340.
- Raynor door sections delaminating near the bottom. Steel Raynor doors with foam insulation can delaminate where Georgia humidity seeps into the weather seal channel. The bottom section gets soft, the door sags, and it starts chewing up the track. We see this often in Marietta homes with poor garage drainage. The fix is a new bottom section or, if the top sections are worn, a full new door install.
- Raynor 3-layer steel door rust at the stiles. The steel stiles on older Raynor doors can rust through where the hinges bolt in, especially in garages near the lake or with high humidity. The hinge pulls loose, and the door binds in the track. We replace the stile reinforcement and hinge, or we recommend a full door replacement if the corrosion is widespread.
- Track misalignment from settling slabs. Marietta soil shifts. When a garage slab settles even a quarter inch, a Raynor door goes out of square and the rollers start wearing unevenly. We realign the track and replace rollers for $110 to $220 per roller set, or we correct the track run if the settlement is ongoing.
- Raynor opener trolley carriage failures on belt-drive systems. Raynor belt-drive openers (some models use a LiftMaster-built chassis) can develop a cracked trolley carriage. The door jerks, or stalls halfway up. We replace the carriage, inspect the belt, and reset the travel limits. Opener repair runs $120 to $320, and if the opener is beyond saving, a new opener installation is $250 to $550.
Styles & brands we work with






Our Raynor Garage Door Installation Process
When you call (762) 209-3693 for Raynor garage door installation in Marietta, here’s what happens, step by step.
- 1
Call and schedule. You talk to a live person, not a phone tree. We confirm the address, hear what the door’s doing, and set a window. You get the technician’s name and photo before anyone leaves the shop.
- 2
On-site inspection. Our tech shows a photo ID badge at the door. We inspect the door, the track, the springs, the opener, and the garage floor. We look for what’s failing now and what will fail next, and we tell you both.
- 3
Written price. The price is printed and handed to you before a single bolt is turned. No verbal estimates. No surprises at the end. If the door needs a part we didn’t quote, the price doesn’t change unless you sign off first.
- 4
The install. We handle the tear-out, haul-away, new door assembly, spring winding, track alignment, and opener integration. We keep the worksite clean and test the door a full cycle three times.
- 5
The walk-through. We show you what we did, explain how the new door operates, and give you the written guarantee. Every repair is covered for 365 days. If it fails, we come back free.
- 6
No leftover mess. We haul the old door and packing materials away. Your garage is cleaner than we found it.
See the difference
Before
After
Before
After
Before
AfterWhat Raynor Garage Door Installation Costs in Marietta
Straight numbers. A new Raynor single-car door in Marietta runs $700 to $2,200 installed, with most jobs landing between $800 and $1,500. A double-car Raynor door typically falls between $1,200 and $2,200. Steel doors sit on the lower end. Wood doors, custom sizes, high R-value insulated panels, and windows move the price up.
What moves the price most: door size, panel material, insulation level, and whether the current track and opener can be reused. If we can keep your existing Raynor track and opener, the install price drops. If the track is bent or the opener is older than the door, we’ll tell you honestly.
Every install includes a free estimate, a written price up front, and our 365-day Done Right Promise in writing. There’s no charge for the second visit if anything fails within a year of install. Call (762) 209-3693 to get an exact number for your garage.
Why Marietta Homeowners Call Doyle Garage Doors Marietta for Raynor Work
We’ve been working on garage doors in Marietta since 2001, and we’re part of the Threshold Group family of home-service companies. Each Threshold Group location is independently owned and operated, but every tech works under the same Threshold Standard: background-checked, identity-verified, and required to show a photo ID at your door. When you book with us, you get the name and photo of the technician before they show up. No other garage door company in Marietta does that.
Our techs know Raynor’s quirks because they’ve taken the factory training and then spent years fixing the things factory training doesn’t cover, like the Marietta humidity that eats bottom seals and the slab settlement that throws tracks out of square. We price everything in writing before work starts and back every repair with a written 365-day guarantee. When a Raynor door isn’t worth saving, we’ll say so, and we’ll show you the math. We also service all major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, and Craftsman, so we’re not going to push you into a Raynor replacement just because that’s the brand on the door. We’ll tell you what’s wrong, what it costs, and who’s coming to fix it, before anyone shows up at your door.
FAQs
How much does Raynor garage door installation cost in Marietta? A full Raynor door install in Marietta runs $700 to $2,200, with most single-car doors between $800 and $1,500 and double-car doors between $1,200 and $2,200. Steel doors cost less than wood, and reusing your existing track and opener lowers the total. Call (762) 209-3693 for a free, written estimate.
Will installing a Raynor door void the manufacturer warranty? No. As an independent Raynor service provider, we install to factory spec. The manufacturer’s materials warranty stays intact as long as the door is installed correctly. We document the install and give you the paperwork. Our own 365-day guarantee on the work applies on top of the manufacturer’s warranty.
How fast can you install a Raynor garage door in Marietta? If we have the door in stock or can get it from our local supplier, most Raynor installs happen within three to five business days after the estimate. Custom and wood doors take longer, typically two to three weeks. We’ll give you a firm window at the estimate. Call (762) 209-3693 and we’ll check current availability.
Do you use OEM Raynor parts or aftermarket? For warranty-sensitive work and safety-critical components like torsion springs and cables, we use Raynor OEM parts. For non-critical hardware like rollers and hinges, we use quality aftermarket parts that meet or exceed spec, which saves you money without compromising the door. The parts decision is always shown to you in writing before we start.
Can you fix a Raynor door today, or do I have to wait? Repair calls are answered 24/7, and we schedule same-day and next-day visits whenever we can. A live person takes the call at day, night, weekends, and holidays. For installation work, we schedule the measure right away and get the door ordered. Call (762) 209-3693 and we’ll tell you exactly when we can be there.
Written by Aaron Teague, Owner, Doyle Garage Doors Marietta at Doyle Garage Doors Marietta, serving Marietta and nearby areas.