Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Before & After in Marietta, GA
We can talk about torsion springs and operator gears until the cows come home, but nothing lands like seeing the work. Here’s a running gallery of actual jobs our technicians have handled in Marietta and Cobb County. What was wrong, what we did, and how it looks now. Photos are added as jobs close, so check back. The captions under each project tell the real story.
Styles & brands we work with






Recent Transformations
Broken Torsion Spring Replacement in East Cobb
The customer called after hearing what they described as “a gunshot from the garage.” That sound is a torsion spring, the large coil mounted above the door that does most of the lifting, snapping under tension. The door was stuck closed with one of the two springs in pieces. We replaced both springs as a matched pair, rebalanced the door, and ran a full cycle test. The door now lifts smoothly with one hand.
Repair cost in Marietta for this job typically runs $280 to $380 including parts, labor, and the written guarantee. The price was written down before we touched a bolt.
Cracked Bottom Panel and Roller Replacement in Kennesaw
This homeowner backed into the bottom section of their two-car Clopay door on a Monday morning. The panel was cracked through and two rollers had popped out of the track. We ordered the matching panel for the door’s stamped steel design, swapped it in, replaced all four bottom rollers, and realigned the track. The door now seals flat against the concrete and runs quiet as a sewing machine.
Bottom panel replacements in Marietta usually run $350 to $700 depending on brand and insulation. We quoted that as a single written number before ordering anything.
Dead LiftMaster Opener Replacement in West Marietta
The opener was original to a 2004 home and the logic board had finally given out. The motor would hum but the carriage wouldn’t move. Rather than patch a 20-year-old unit, the customer chose to replace it with a new belt-drive LiftMaster with battery backup. We pulled the old rail, motor, and wiring, mounted the new system, and reprogrammed both remotes and the keypad.
A new LiftMaster opener installed in Marietta typically costs $480 to $750, depending on the model. That includes haul-off of the old unit and a written quote handed over before we started.
Garage Door Off Track After a Storm in Smyrna
High winds during a spring thunderstorm rattled this older wooden door until two of its rollers jumped the track. The door was hanging at an angle, halfway open. We got the weight supported safely, pulled the door back onto the track, replaced the bent roller brackets, and added a pair of reinforcement struts to the top section so the wind flexes it less going forward.
This kind of repair in Smyrna and Marietta usually runs $175 to $325, and the homeowner said the door actually runs smoother now than before the storm.
Opener Chain Slipping and Door Reversing in Powder Springs
The homeowner told us the door would start down, hesitate, and shoot back up like a startled cat. That’s a classic worn gear and sprocket on a Chamberlain chain-drive opener. The chain had stretched and the plastic drive gear was stripped smooth. We replaced the gear and sprocket assembly, tensioned the chain properly, and reset the travel limits. Door runs wall to floor without a hiccup now.
A gear and sprocket rebuild in Marietta costs $180 to $280. The customer kept their otherwise solid opener and saved the price of a full replacement. Either way, we’d have written the number down first.
New Amarr Insulated Door Installation in North Marietta
The old single-layer door had dents, a sagging hinge line, and no insulation. The garage stays hot in July and cold in January. The homeowner chose a new Amarr triple-layer door with an R-12 insulation core, new torsion springs, a new seal, and quiet nylon rollers. We scheduled the measure, gave a written price, and the full changeout took less than a day.
A new insulated garage door in Marietta, installed with new hardware and springs, typically runs $1,400 to $2,600 depending on size and window options. That’s a measured quote, not a guess.
Want Results Like These?
If your garage door is doing something it shouldn’t, or just looks like it’s been through a decade of dented neglect, we can put a plan in writing before we ever turn a screw. Aaron Teague runs every job through the same three commitments: written price first, written guarantee on every repair, and a free second visit if the repair fails within 365 days. Call (762) 209-3693 and a live person picks up, day or night.
Written by Aaron Teague, Owner at Doyle Garage Doors Marietta, serving Marietta since 2001.
See the difference
Before
After
Before
After
Before
After