Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Marietta, GA
We’re Doyle Garage Doors, the Marietta garage door company that tells you exactly who’s coming to your door before we arrive. If you live in a 1960s brick ranch off Whitlock Avenue or a split-level near Kennesaw Mountain, you already know Marietta’s older garage doors fail differently than newer builds elsewhere. The humidity, the red clay, the original springs still holding up doors installed when the neighborhood was new. Our technicians see it every week, and we’ll quote your repair in writing before any work begins. Call (762) 209-3693 and a real person answers, day or night.
Why Marietta Homes Are Different
Most Marietta homes were built between 1960 and 1985, and their garages show it. The brick ranch and split-level stock along Church Street, Powder Springs Road, and Roswell Street often still has the original wooden or early steel garage door. Wood doors in particular absorb the humidity that sits over Cobb County from May through September. They swell, they warp, and a door that fit fine in March suddenly sticks against the jamb in July. Early steel doors have their own problem: rust at the roller brackets and along the lower panel where the door sits closest to wet concrete.
The red clay soil matters too. It holds moisture against foundation edges and garage floors, which means track bolts and bottom brackets corrode faster than they do in drier parts of Georgia. And Marietta’s older torsion springs – the large coils above the door that do the heavy lifting – were sized for doors made forty or fifty years ago. When a wood door absorbs water and gains weight, or when spring temperatures swing hard in March and October, those original springs snap with a bang that sounds like a gunshot from inside the house. It’s the single most common weekend emergency call we take across Marietta.
Styles & brands we work with






Our Main Marietta Services
These are the three jobs Marietta homeowners call us about most often. Each has its own page with full detail on local conditions and pricing.
Garage Door Repair in Marietta
Repair calls here almost always come down to one of four failures: a broken torsion spring, a snapped cable, a rusted roller hub, or a track pushed out of alignment by years of seasonal expansion and red-clay moisture. On a Marietta split-level built in the 70s, it is not unusual to find all four wearing down at once. We carry the common spring sizes and roller hardware on the truck, and most repair appointments are finished in a single visit with the price handed to you in writing before we touch anything. Garage Door Repair in Marietta

Garage Door Installation in Marietta
When a wooden door has warped past the point of reliable repair, or a steel door has rusted through at the panels, replacement is the honest recommendation. We measure the opening, walk you through steel, wood-composite, and insulated options from Clopay and Amarr, and give you a written line-item quote before you commit to anything. Installation in Marietta’s older neighborhoods often requires new track and hardware to match modern door weight, so the quote covers the whole job, not just the door panel itself. Garage Door Installation in Marietta

Garage Door Opener Repair in Marietta
Opener failures in Marietta track closely to age and lightning. The heavy thunderstorms that roll through Cobb County each summer take out circuit boards and limit switches in aging openers, and we replace more trolley carriages – the part that pulls the door along the rail – on older LiftMaster and Chamberlain units than any other component. Whether it is a chain or belt drive, we diagnose it on site, quote the repair in writing, and carry common opener parts on the truck. Garage Door Opener Repair in Marietta

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Marietta
We work on all major brands, and we keep the most-common Marietta replacement parts on hand: torsion springs sized for mid-century doors, Clopay and Amarr panel sections, and Wayne Dalton and Craftsman opener boards. That local stock is why most repairs here are finished in one trip. You can see the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Marietta, GA
| Service | Typical Range in Marietta |
|---|---|
| Garage Door Repair | $150 – $600 |
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2,200 |
What pushes the price toward the top of these ranges in Marietta is the age of the house. Original wooden doors often need track and hardware replaced alongside the door itself, and rusted springs on early steel doors frequently break in pairs. Whatever the job, the price is written down and handed to you before a single bolt is turned. No verbal estimates, no surprises at the end.
Neighborhoods We Serve in Marietta
We dispatch to every Marietta neighborhood, from the historic streets around the Square out to the subdivisions along Dallas Highway and Sandtown Road. Typical response time across the city runs under two hours for repair calls, including weekends.
- Church Street area and Marietta Square
- East Cobb along Roswell Road and Johnson Ferry
- Whitlock Avenue and West Marietta
- Sprayberry and Sandy Plains
- Powers Ferry and Terrell Mill
Service Area – Cities Near Marietta
We also serve the surrounding Cobb County and west metro area. If you’re nearby, you can find local details for Smyrna, GA, Kennesaw, GA, Powder Springs, GA, and Mableton, GA. Scheduling works the same in every city: live phone answer, technician name and photo sent before arrival, written price before work.
Serving Marietta, GA - Our Local Coverage Area
We’re based in the Marietta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Marietta
Most repair calls in Marietta are reached in under two hours, often faster. Dispatch is coordinated from the brand’s Atlanta office, and our Marietta-based crews route locally all day. A live person answers the phone 24/7, including weekends and holidays, so you’ll know the estimated arrival before you hang up. Call (762) 209-3693 and ask.
Many Marietta subdivisions and historic-district areas around the Square do require door style and color approval before replacement. It varies by neighborhood and HOA covenant. We’ll confirm what your specific association requires before scheduling, and we can provide the door specifications and color samples you need for your application.
Marietta is our regular service area. We take repair calls, opener replacements, and full door installations across the entire city, and we do not charge extra for small jobs. The price you’re quoted covers the work, no dispatch fee stacked on top for being inside city limits. Call (762) 209-3693 for a free estimate on any job size.
What happens when you call
- 1A real person answersNo phone trees - talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Marietta Customers Say
"Opener kept reversing halfway down. Turned out the safety sensors were out of line and one wire was frayed. Fixed it for a small charge instead of selling me a new unit."
- Roberto F."Door came off the track on one side and I couldn't get it to budge. He had it back on the rollers and straightened in about 40 minutes. Quoted price was the final price."
- Linda H."Honestly the careful way he checked in at the door and explained each step made the whole thing easy. Door works great and the price matched the estimate."
- Irene J.