Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterSpring Repair in Marietta, GA
Garage door spring repair in Marietta typically costs $225 to $385 for a torsion spring replacement, and most jobs are completed the same day you call. That price includes the spring itself, the labor to install it, and a basic safety check of the rest of your door. At Doyle Garage Doors Marietta, we put that number in writing before we touch a single bolt, and every spring we install carries our 365-Day Done Right Promise. We also offer full Garage Door Repair services for any issue beyond the spring.
A broken spring is the most common reason a garage door won’t open. The spring does the heavy lifting, not the opener motor. When it snaps, the door becomes a dead weight, often hundreds of pounds. If you have an opener, trying to force the door up can burn out the motor in minutes. If you don’t, lifting it by hand is a genuine injury risk. The smart move is simple: don’t mess with it. Call us at (762) 209-3693, and we’ll have a background-checked, uniformed technician at your door with a name, photo, and written price.
Doyle Garage Doors Marietta is part of the Threshold Group family, founded in 2001, and independently owned and operated under the Threshold Verified standard. That matters for spring repair because it means every tech who walks onto your property is identity-verified and has already sent you their name and photo before they ring the bell. For homeowners who are often home alone, parents with young kids, and older residents who think twice before opening the door to a stranger, that step is the difference between hiring a repair company and just hoping for the best. For more on everything else we repair, see our Garage Door Repair in Marietta page.
When You Need Spring Repair
Most homeowners don’t think about their garage door spring until the moment it fails. Here’s what that failure looks and sounds like in Marietta, and what to watch for before it happens:
- Your garage door won’t open more than a few inches, or won’t open at all. The opener strains, the track flexes, and the door stays put. That’s almost always a broken spring. It’s nothing to do with the opener.
- A loud bang from the garage that sounds like a firecracker or a car backfiring. That’s the sound of a torsion spring snapping. It’s startling, but it’s not dangerous as long as you don’t stand under the door and don’t try to open it by hand.
- The door opens a foot or two and then slams back down. On a healthy door, the spring counterbalances the weight. Once the spring has lost tension or cracked, the door drops fast. In older Marietta homes near the Square and along Whitlock Avenue, we see this on doors that are 15 to 20 years old and were original to the house.
- You can see a visible gap in the spring coil. Torsion springs sit above the closed door, mounted on a metal shaft perpendicular to the tracks. If the coil has a two-inch break in it, that’s a torsion spring failure. Extension springs run along the upper tracks on either side and will visibly separate when broken.
- Your door feels unbalanced. Disconnect the opener and try lifting the door by hand. It should glide up with modest effort and stay put around waist height. If it drops like an anchor or takes all your strength to move, the spring is failing, even if it hasn’t snapped yet. Georgia’s humidity and temperature swings accelerate spring wear, so we see premature fatigue here more than in drier climates.
- One side of the door sits higher than the other when closed. This can point to a weakening spring, a stretched cable, or both. It’s a repair that gets worse fast in Marietta’s wet springs and hot summers.
Some of these symptoms overlap with Cable Repair or roller problems, so a good first step is a phone call to us at (762) 209-3693. We’ll ask a few questions, tell you whether it sounds like a spring, and get a technician scheduled.
Our Spring Repair Process
We follow the same five-step process on every spring job. You’ll know who’s coming, what it costs, and what we’re doing before any work starts:
- You call and get a live person. Not a voicemail tree, not a bot, not a callback request. A real person answers at (762) 209-3693, day or night, weekends and holidays included. We’ll listen to what happened and schedule a visit, usually the same day.
- You get the technician’s name and photo before they arrive. Every Doyle technician is background-checked and identity-verified under the Threshold Standard. Before we pull up, you’ll see the tech’s name and photo on your phone. When they knock, they’ll be in a clean, marked uniform and show a photo ID badge. No exceptions, every time.
- The tech inspects the full door. Spring failure rarely happens in isolation. We check the cables, rollers, hinges, center bearing, and the opener’s force settings. If the spring broke because the door was out of balance for months, replacing the spring alone just means it’ll fail again early. We tell you what we find in plain language, using the real trade words and then explaining each one.
- You get a written price before work begins. That’s not a verbal estimate, not a ballpark, not a “we’ll see how it goes.” It’s the exact dollar amount, printed and handed to you, covering the spring, the labor, and any other parts we recommend. You approve it first. We don’t start until you say go.
- We install, balance, and test the door. Torsion springs are wound under high tension and must be set precisely. We install the correct size spring for your door’s weight and size, not a one-size-fits-all unit. Then we cycle the door several times, check the balance under the Threshold Standard, adjust the opener limits, and clean up the work area. You get a written 365-Day Done Right Promise on the spot: 365 days from the date of repair, if it fails, we come back and make it right at no charge.
Spring Repair Pricing in Marietta
Here’s what garage door spring repair costs around Marietta, based on the type of spring and how your door is configured. These are honest ranges we’ve seen across Cobb County in our years working from the historic neighborhoods around the Square out to East Cobb and West Marietta.
| Repair Type | Typical Marietta Price Range | What It Includes |
|---|---|---|
| Single torsion spring replacement | $225 – $385 | One spring, labor, balance check, written guarantee |
| Double torsion spring replacement | $425 – $650 | Both springs (recommended to match life cycles), labor, full door tune-up |
| Extension spring replacement (pair) | $190 – $320 | Both springs, safety cable check, balance, written guarantee |
| Spring + cable replacement | $325 – $490 | Springs and cables together, full testing |
| Garage door tune-up with spring inspection | $95 – $160 | Full inspection, lubrication, minor adjustments |
What changes the price? Three things. First, the type of spring. Torsion springs, which mount above the door, cost more than extension springs because they must be precisely wound and carry far more tension. Second, whether you have one spring or two. Standard practice is to replace both torsion springs at the same time, even if only one snapped. They wear together, and the second one is typically near the end of its life. That’s not an upsell; it’s the same recommendation any honest company will make. Third, the door’s weight. Heavy solid-wood carriage-house doors common in older Marietta homes need heavier-duty springs than standard steel doors.
We mention brands here because they affect parts cost: Chamberlain, Genie, Clopay, and Amarr doors each recommend specific spring wire gauges based on door weight, and factory-spec parts sometimes cost a few dollars more than generic ones. We’ll show you the line items and explain what each number means.
Every estimate is free. There’s no service-call fee to look at the job and no charge to write the price down. Call (762) 209-3693 and you’ll get a real person and a straight answer about what your spring repair will cost.
FAQs – Spring Repair
How much does garage door spring repair cost in Marietta?
You’ll pay between $225 and $385 for a single torsion spring replacement in Marietta, or $425 to $650 if both springs need replacing. Extension springs run $190 to $320 per pair. These prices include labor and our 365-day written guarantee. The only way to know your exact number is a quick inspection, because spring gauge, door weight, and whether we’re also replacing cables or doing Track Realignment all factor in. Call (762) 209-3693 for an exact quote. Estimates are free, and the price is written down before anything starts.
Can you fix a broken garage door spring the same day?
Yes, in almost every case. We stock the common torsion and extension spring sizes for Chamberlain, Genie, Clopay, and Amarr doors on our trucks, so your technician usually has what’s needed right there. Call us in the morning and you’ll often have the door working again by afternoon. If your spring size is uncommon, we’ll still show up the same day, confirm what’s needed, and complete the repair as soon as the part is in hand. Call (762) 209-3693 and we’ll tell you if same-day is possible for your setup.
Is it cheaper to repair or replace a broken spring?
Repair is almost always cheaper. A $300 spring replacement is a fraction of what a new garage door costs, and it often restores the door to full working order. The only time replacement makes more sense is when the door itself is severely dented, rusted through at the bottom panel, or more than 25 years old with multiple failing parts. If that’s your situation, we’ll be straight with you and show you the repair cost versus the replacement cost side by side. Call (762) 209-3693 for an honest recommendation.
Can I replace a garage door spring myself?
No, and this isn’t a warning we give lightly. A torsion spring is wound under extreme tension, enough to move a 300-pound door. If it releases while you’re working on it, it can cause serious injury. Extension springs snap back with similar force. This is one repair where even experienced DIYers should stay clear. We’re trained for this specific job, we carry the right winding bars and rated parts, and we balance the door afterward so the new spring lasts. If your spring just broke, call (762) 209-3693 and a Threshold Standard technician will handle the dangerous part safely.
How long do garage door springs last in Georgia?
Most torsion springs are rated for 10,000 cycles, which translates to roughly 7 to 12 years of normal use in Marietta. A cycle is one full open and close. If your household opens the garage four times a day, that’s about 1,460 cycles a year. Heat and humidity accelerate metal fatigue, and Marietta’s summers are hard on springs. A spring that’s 10 years old and suddenly won’t hold tension is at the end of its designed life, not a fluke. Call (762) 209-3693 and we’ll inspect it and tell you exactly what we find.
Do you guarantee spring repairs?
Yes, in writing. Every spring repair from Doyle Garage Doors Marietta includes the 365-Day Done Right Promise. If it’s not done right, we make it right: 365 days from the date of repair, if the spring fails, we come back and fix it at no charge. No argument, no fine print, no pro-rated depreciation. If the repair fails, the second visit is free, covered automatically. Call (762) 209-3693 and we’ll walk you through everything before you commit to anything.
Your Spring Repair Team in Marietta
When you call (762) 209-3693, a live person answers. When your tech arrives, you already know their name and what they look like, because we sent both to you beforehand. The price is in writing before the work begins. The guarantee is on paper before we leave. That’s how Doyle Garage Doors Marietta has done spring repair since 2001, as part of the Threshold Group family, under the Threshold Verified standard. It’s not a shortcut, and it’s not the cheapest way to run a garage door company. It’s the right way.
If your garage door won’t open, call us at (762) 209-3693 for a free estimate. Same day service is available, and a real person will pick up the phone.
Written by Aaron Teague, Owner at Doyle Garage Doors Marietta, serving Marietta.